Ready to Install SONOpanX?

Our soundproofing panels for floors are extremely effective and versatile, making them ideal for a variety of applications. Designed to reduce impact sound transmission through floors/ceilings, SONOpanX panels are an easy-to-install solution for any soundproofing project.

Play Video

Installation

SONOpanX Installation Video

“Soundproofing is often overlooked in renovations, but working on Caerula Mar over the past two years has definitely “opened my ears” to the benefits of quality soundproofing. With SONOpan, it doesn’t have to be complicated or costly. It’s easy to install, lightweight, and affordable. Take it from me, with SONOpan – you won’t believe what you’re not hearing”

INSTALLATION

Get Started

Before installing SONOpanX flooring panels, ensure that the installation site and conditions match those described on this page.

The soundproofing panels must be protected from the elements at all times and should always be stored lying flat. SONOpanX panels are not structural, a structural subfloor must be in place before installing SONOpanX. These instructions correspond to residential and light commercial applications.

SONOpanX should be installed with the dimple side facing down ensuring a tight fit between panels.

  • Ensure the panels and installation site are level and debris-free.
  • Verify that the subfloor meets tolerances for the selected finished flooring.
  • Secure the subfloor with screws or glue before installing SONOpanX to prevent squeaks and movement that could create noise.
  • Offset the rows by 24 inches (610mm) and leave a gap of ⅛” – ¼” (3 – 6mm) around the perimeter of the room and any opening made in the SONOpanX (I.E. for a plumbing stack)
  • Fill the perimeter gap with an acoustical sealant or backer rod.

INSTALLATION

Flooring Installation

Step 1

Store panels lying flat prior to use.

Step 2

SONOpan X panels are made from wood and cut best with a circular saw. They may also be cut with a sharp knife, but do not score and snap!

Step 3

SONOpan X should be installed with the dimple side facing down. Ensure a tight fit between panels.

Step 4

Staple panels using 1″ (25mm) long crown staples. Place 9 staples in each panel, following the spacing guide above. Staples should be countersunk to a depth of 1/16″ (1mm) below the surface.

Step 5

Leave a gap of 1/8-1/4″ (3-6mm) around the perimeter of the room and around any opening made in the SONOpan X.

Step 6

Flooring must be installed shortly after the installation of SONOpan X to avoid unnecessary wear on the soundproofing panel. A variety of floor types can be used over SONOpan X, see sonopan.com for more information.

Working With SONOpan

icons8-circular-saw-500
Cutting Instructions - For optimal results, use a circular saw equipped with a fine-tooth blade. When cutting indoors, it’s recommended to use a track saw with a dust extractor.
icons8-screws-400
Fastening - Secure SONOpanX with crown staples, countersunk.




icons8-caulk-512
Finishing - Seal the perimeter of the wall and any gaps with acoustical sealant.